Product Reviews

SmallRig 2905B Field Monitor Mount Holder Review

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review centers on a compact shoe-mounted support for positioning a 5- or 7-inch monitor on a camera cage or handle.

Its tilt and swivel adjustments, tension controls, and anti-twist details suit rigs where monitor angle needs frequent changes.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides 180-degree tilt and 360-degree swivel adjustment.
  • Tilt tension adjusts with a thumbscrew; swivel tension is adjusted using the included Allen wrench.
  • The top includes locating pins and a silicone pad intended to help secure monitors such as the Ninja V or V+ and reduce surface scratching.

Pros

  • Broad tilt and swivel range makes it easier to orient a monitor for different viewing positions.
  • Thumbscrew tilt adjustment avoids needing a wrench for that frequently changed setting.

Consider before buying

  • Load capacity varies by tilt angle, so buyers need to check the relevant limit for their monitor and chosen position.
  • Swivel tension requires the included Allen wrench, and the top knurled screw should also be retightened with the wrench for additional security.
Read the full review summary

This mount combines a cold shoe base with a 1/4-inch-20 threaded hole, giving it two ways to join a camera rig.

A top 1/4-inch-20 screw supports a monitor or other small accessory, while locating pins and a silicone pad are designed to help resist twisting and surface scratches. At 76 grams, it adds little listed weight to a setup.

Its main appeal is direct monitor positioning without a longer articulating arm.

The tilt moves through 180 degrees and the mount swivels through 360 degrees, with tilt tension adjusted by hand and swivel tension set with the included Allen wrench.

Load capacity depends on angle, so this is best for buyers who can keep their monitor and setup within the specified limits and who value a low-profile mount.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle adjustment

Offers 180-degree tilt and 360-degree swivel, with separate tension adjustment for positioning.

8/10

Mounting flexibility

Includes a cold shoe base, a bottom 1/4-inch-20 threaded hole, and a top 1/4-inch-20 screw.

8/10

Anti-twist support

Locating pins and a silicone pad are intended to help secure the monitor and protect its surface.

9/10

Compactness

The listed weight is 76 grams and folded dimensions are 78 × 67 × 42 mm.

7/10

Load guidance

Capacity is specified by tilt angle, which is useful guidance but requires checking the actual setup against each limit.

7/10

Setup convenience

Tilt tension uses a thumbscrew; swivel tension and the top screw call for the included Allen wrench.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides 180-degree tilt and 360-degree swivel adjustment.
  • Tilt tension adjusts with a thumbscrew; swivel tension is adjusted using the included Allen wrench.
  • The top includes locating pins and a silicone pad intended to help secure monitors such as the Ninja V or V+ and reduce surface scratching.
  • The base has a cold shoe adapter and a 1/4-inch-20 threaded hole for a magic arm or stabilizer; the top 1/4-inch-20 screw can mount a monitor, microphone, or light.
  • Angle-specific load limits are less than 9.3 pounds at 90 degrees, less than 5.5 pounds at 45 degrees, and less than 5 pounds at 30 degrees.
  • Listed weight is 76 grams; folded dimensions are 78 × 67 × 42 mm.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Broad tilt and swivel range makes it easier to orient a monitor for different viewing positions.
  • Thumbscrew tilt adjustment avoids needing a wrench for that frequently changed setting.
  • The cold shoe base and threaded connection provide two mounting routes for compatible rigs.
  • Locating pins and a silicone pad add monitor contact and anti-twist features.

Consider before buying

  • Load capacity varies by tilt angle, so buyers need to check the relevant limit for their monitor and chosen position.
  • Swivel tension requires the included Allen wrench, and the top knurled screw should also be retightened with the wrench for additional security.
  • A cold shoe mount is useful only when the rig has a compatible shoe; other installations depend on the threaded connection.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider it if you use a 5- or 7-inch camera monitor and want a compact mount that can tilt and swivel directly from a cage or handle.

The angle-specific capacity figures make it possible to compare your monitor and intended position against stated limits before building the rig.

It is also a practical fit if you expect to adjust tilt often: the thumbscrew handles tilt tension, while the silicone pad and locating pins are designed to help hold the monitor in place.

Check that your support has a cold shoe or a suitable 1/4-inch-20 threaded interface, and keep the included Allen wrench available for swivel tension and final screw tightening.

Who should skip it

Look elsewhere if your setup needs an extended reach away from the camera or relies on a clamp around a rod, tube, or table edge.

This mount is designed for a cold shoe or threaded connection, rather than a separate clamp-and-arm arrangement.

Choose another setup if the monitor and its working angle exceed the relevant load limit. The stated maximum changes with tilt angle, so do not assume one capacity figure applies across the full adjustment range.

How the SmallRig Monitor Mount Fits a Camera Rig

A direct way to place a monitor

The short mount design keeps the display attached near the cage or handle instead of extending it on a long arm.

That can help keep a compact rig organized, while the 360-degree swivel and 180-degree tilt provide room to orient the screen. The actual useful position will depend on where the camera’s shoe or threaded support sits.

Tension control and handling

The tilt thumbscrew is the most convenient adjustment for routine reframing because it can be operated by hand. Swivel tension uses an Allen wrench, so rotating the monitor is less tool-free.

The product also calls for retightening the top knurled screw with that wrench for added security, making the wrench part of the setup rather than an optional extra.

Load depends on the angle

The capacity guidance changes as the monitor tilts: the listed limits are below 9.3 pounds at 90 degrees, below 5.5 pounds at 45 degrees, and below 5 pounds at 30 degrees.

Buyers should use the limit for the planned angle and consider the complete mounted load, especially if adding an accessory to the top screw.

Check the connection before buying

The base is intended for a cold shoe and also has a 1/4-inch-20 threaded hole for another compatible support, while the top uses a 1/4-inch-20 screw.

Confirm that the desired point on your rig matches one of these interfaces and that the monitor can sit properly against the locating pins and silicone pad.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SmallRig 6313 Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SmallRig 6313 Camera Monitor Mount

Consider the 6313 if portrait or landscape installation and a retractable locating screw are priorities. The 2905B remains a clear option when its specified load limits and fixed top screw suit the monitor setup.

  • The 6313 has a cold shoe base, a bottom 1/4-inch-20 threaded hole, a retractable top locating screw, and support for horizontal or vertical monitor installation.
  • Its listed weight is 71.7 grams.
  • The 2905B offers cold shoe and 1/4-inch-20 base connections, angle-specific load limits, locating pins, and a silicone pad.

Camera Mounts & Clamps alternative

SmallRig 1498 Articulating Rosette Arm
4.6/5

900+ ratings

Read Amazon Reviews

SmallRig 1498 Articulating Rosette Arm

Choose the 1498 if you need the monitor positioned farther from the mounting point and want an articulating arm. The 2905B is better aligned with a compact, direct mount when its angle-dependent capacity is suitable.

  • The 1498 is an 11-inch articulating arm with a shoe base at one end and a 1/4-inch-20 thread at the other.
  • Its description gives a maximum load capacity of 2.8 kg and a best load range of 1.5–2 kg.
  • The 2905B is a compact direct monitor mount with a cold shoe base and a bottom threaded hole.

Is SmallRig Monitor Mount Worth It?

The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact camera rig that needs flexible monitor positioning without a long arm.

Its broad tilt and swivel range, hand-adjustable tilt tension, and anti-twist contact features address the practical needs of a small monitor mount.

Before choosing it, verify the connection on your cage or handle and match the monitor’s load to the limit for your intended angle.

Buyers who need a longer reach or a different mounting arrangement should compare an articulating arm instead.

Your review at a glance

SmallRig 2905B Field Monitor Mount Holder
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides 180-degree tilt and 360-degree swivel adjustment.
  • Tilt tension adjusts with a thumbscrew; swivel tension is adjusted using the included Allen wrench.
  • The top includes locating pins and a silicone pad intended to help secure monitors such as the Ninja V or V+ and reduce surface scratching.

Written by

latalklive.com Editorial Team

Editorial team

Independent editorial coverage of talk, audio & culture.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2905B Field Monitor Mount Holder

SmallRig 2905B Field Monitor Mount Holder

A compact adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.

  • Designed to support 5- and 7-inch camera monitors through a cold shoe connection on a camera cage or handle.
  • Provides 180-degree tilt and 360-degree swivel adjustment.
Check Video Reviews on Amazon