The FIFINE Microphone Boom Arm review centers on the BM88, a low profile metal desk arm designed to position a microphone below the monitor while keeping the work surface more open.
Its broad rotation, included thread adapters, and cable channels make it worth considering for streaming, gaming, or recording setups, provided the clamp fits your desk.
FIFINE BM88 Review Summary
The quick verdict

5,000+ ratings
Read Amazon ReviewsFIFINE BM88 Microphone Boom Arm
A low profile desk arm for podcasters, streamers, and gamers who want an adjustable microphone position and built-in cable routing.
- Low profile arm intended to extend from below the bottom of a computer screen.
- All-metal arm construction with a C-clamp for flat desktops.
- Up to 29 inches of extension, up to 220 degrees of vertical adjustment, and 360 degrees of horizontal rotation.
- Integrated cable management to route the microphone cable along the arm.
Pros
- Low profile layout is designed to keep the arm below the monitor and leave more of the desk accessible.
- Useful range of reach and movement makes it possible to adjust the microphone position for different desk routines.
Consider before buying
- The microphone is not included, so this is an arm and mounting hardware rather than a complete audio setup.
- The clamp has a defined desktop thickness range; measure the mounting edge before buying.
Read the full review summary
The BM88 pairs a low profile profile with up to 29 inches of extension, 220-degree vertical adjustment, and 360-degree horizontal rotation.
That combination gives buyers several ways to bring a microphone toward the speaking position or move it out of the way, while the arm's under-screen path is designed to preserve the monitor view.
Its all-metal construction, desk clamp, cable management, and three thread sizes make it a fairly complete starting point for a desk microphone setup.
It is best suited to users who want a clean, repositionable arm; check the microphone's mounting thread and the desk thickness before choosing it, since the mic itself is not included and the clamp is sized for desktops from 0.8 to 2.4 inches thick.
The buying factors
FIFINE BM88 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Low profile desk fit
The arm is designed to extend beneath the screen, helping preserve the view and free desk space.
Positioning range
Up to 29 inches of extension and broad horizontal and vertical adjustment support varied desk positions.
Cable organization
Built-in cable channels can keep a microphone lead routed along the arm.
Mounting versatility
The supplied 1/4-inch, 3/8-inch, and 5/8-inch thread options cover a range of microphone and accessory mounts.
Desk compatibility
The clamp accommodates desktops 0.8 to 2.4 inches thick, so buyers need to check that measurement.
Setup completeness
The package includes the arm, clamp, rotatable ball-head, adapters, Allen wrench, and manual; the microphone is separate.
Key Features and Specifications of FIFINE BM88
- Low profile arm intended to extend from below the bottom of a computer screen.
- All-metal arm construction with a C-clamp for flat desktops.
- Up to 29 inches of extension, up to 220 degrees of vertical adjustment, and 360 degrees of horizontal rotation.
- Integrated cable management to route the microphone cable along the arm.
- Three mounting thread sizes: 1/4 inch, 3/8 inch, and 5/8 inch, with two adapters attached to the rotatable ball-head.
- Desk clamp fits desktop thicknesses from 0.8 to 2.4 inches.
- Package includes boom arm stand, desk clamp, rotatable ball-head, Allen wrench, manual, and thread adapters; microphone is not included.
Pros and Cons of FIFINE BM88
Pros
- Low profile layout is designed to keep the arm below the monitor and leave more of the desk accessible.
- Useful range of reach and movement makes it possible to adjust the microphone position for different desk routines.
- Integrated cable routing helps keep the lead organized along the arm.
- Included thread adapters reduce the need to source a separate adapter for compatible microphone mounts.
Consider before buying
- The microphone is not included, so this is an arm and mounting hardware rather than a complete audio setup.
- The clamp has a defined desktop thickness range; measure the mounting edge before buying.
- The section nearest the C-clamp does not move vertically, which limits adjustment at that joint.
Who Should Buy FIFINE BM88?
Good fit
Consider the BM88 if you want a microphone arm that can stay below a monitor and swing between an in-use position and a less intrusive one.
The 29-inch reach and 360-degree horizontal rotation offer flexibility for different desk layouts, while the cable management can help keep a wired microphone setup tidy.
It also makes sense if your microphone or shock mount uses one of the supplied thread sizes.
Before ordering, confirm that the mounting point on your equipment matches the 1/4-inch, 3/8-inch, or 5/8-inch options, and check that the clamp can attach to a flat desk edge within its 0.8-to-2.4-inch range.
Who should skip it
Skip this style if you specifically need the arm joint closest to the clamp to move vertically; that section is fixed in that direction.
If your desktop falls outside the clamp's stated thickness range, check your mounting options before choosing this arm.
FIFINE BM88: What the Low Profile Design Means
A monitor-friendly arm path
The low profile geometry is intended to bring the microphone in from beneath the screen.
That can suit gamers and people who work at a monitor, especially when a raised arm would cross the display or take up space above the desk.
Actual clearance depends on the screen and desk arrangement, so consider where the arm's clamp and extension will sit.
Reach and adjustment at the desk
With up to 29 inches of extension, 220 degrees of vertical adjustment, and full horizontal rotation, the BM88 can be positioned across a substantial portion of a desk.
The limitation is localized: the section beside the clamp does not adjust vertically. Think through the path from clamp to microphone and whether the remaining joints give you the approach angle your setup requires.
Cable routing and mounting fit
Built-in cable management is useful for keeping a wired microphone lead alongside the arm, reducing loose cable across the desktop.
The rotatable ball-head comes with 1/4-inch to 3/8-inch and 3/8-inch to 5/8-inch adapters, so check the mount on your microphone or shock mount before purchase. The microphone is a separate item.
Clamp fit comes first
The C-clamp is intended for a flat desktop between 0.8 and 2.4 inches thick.
Measuring the edge you plan to use is a simple way to avoid a mismatch, particularly if the desk has a lip or other shape that could affect how the clamp sits.
Alternatives to FIFINE BM88
One distinct alternative is included because the other supplied options are color variants of the BM88 design.
Microphone Stands alternative

800+ ratings
Read Amazon ReviewsFIFINE BM63 Heavy Duty Suspension Scissor Microphone Boom Arm
Choose the BM88 if its low profile route, longer stated extension, and multiple thread sizes better suit your monitor and mounting setup.
Consider the BM63 if you prefer a foldable scissor arm and its stated 2 kg capacity and single 5/8-inch mount match your microphone and desk.
- The BM63 is a foldable suspension scissor arm with a stated capacity of up to 2 kg, a universal 5/8-inch screw, and vertical and horizontal adjustment ranges of 180 and 135 degrees.
- It includes three Velcro cable ties, and its clamp is for desktops 2 inches thick or less.
- The BM88 uses a low profile path beneath the monitor, extends up to 29 inches, and includes 1/4-inch, 3/8-inch, and 5/8-inch thread options.
Is FIFINE BM88 Worth It?
The FIFINE BM88 is worth considering for a desk-based streamer, gamer, or podcaster who wants a low profile arm with broad positioning options and built-in cable routing.
Its included thread adapters also make it adaptable to several common mounting sizes.
Check the clamp thickness range, desk edge, and microphone thread before buying, and account for the microphone being sold separately.
If those fit your setup and the fixed vertical joint beside the clamp does not constrain your preferred placement, the BM88 offers a practical, space-conscious way to mount a desk microphone.
Your review at a glance

5,000+ ratings
Read Amazon ReviewsFIFINE BM88 Microphone Boom Arm
A low profile desk arm for podcasters, streamers, and gamers who want an adjustable microphone position and built-in cable routing.
- Low profile arm intended to extend from below the bottom of a computer screen.
- All-metal arm construction with a C-clamp for flat desktops.
- Up to 29 inches of extension, up to 220 degrees of vertical adjustment, and 360 degrees of horizontal rotation.
- Integrated cable management to route the microphone cable along the arm.